- Desktop Review
- Working with the new Desktop
- Post Processor for BobCad
- Test Post/New member
- New owner
- WHen are the new toys due out?
- Digitizer Output File
- First complete job using the ShopBot Desktop
- Spindle size
- ShopBot Desktop Cart
- Engrave pens with desktop?
- Dust Control / Machine enclosure
- Collet/bit/shank advice
- wonky Y
- Spoilboard levelling bit
- DT spindle RPM vs frequency chart
- Some performance questions on Desktop
- Material for leather embossing plates?
- Right bit for the job
- A few tips from a beginner to other beginners; my first project
- probably the rookiest of rookie questions:
- aspire and the desktop
- Jogging From The Keyboard
- Problems With Brand New Desktop Model
- Pens on the indexer
- Home lost during 3D cut
- Control Software 3.8.2 and output 4
- C3 proximity test Y not performed 3.8.02
- Increasing Z?
- fein Vacs attachments
- Total Rookie w/ woodworking needs assist
- should I pull the trigger?
- Spindle upgrade
- desk top
- Is this possible? cubes
- Controlling Vacuum and Unattended Work
- stand for desktop?
- Upper Z limit proximity switch
- vacuum switch
- Desktop arrived
- Z Zeroing Failure on Second Plunge
- Desktop Vacuum on Make magazine blog
- Has anyone modified their spindle guard?
- Thoughts on my New Purchase
- Router Speed Setting
- problems when zeroing the x axis.
- Beginners' Source of Materials
- Looking for a How-to for Raised Letters
- Router Speeds by Setting
- When to zero off the table rather whan workpiece.
- My Lessons Thus Far
- First Expansion for Router Bit Set
- Aluminum Channel Nuts
- Spindle speeds automatic?
- z jog speed setting?
- Need help understanding spindle specs
- Will a Donek drag knife work with the Desktop?
- Grease fittings
- Pen holder for the Desktop
- Good size table top for the Desktop?
- What to do with the Crate....
- Desktop Dovetails?
- Santa dropped off a present today...
- ShopVac HP?
- Cleaning woodgum from bits
- Desktop Deliciousness
- V Carve Update to 7.015
- Angles Other than 90
- My Desktop is Disabled until I Find a Cure
- Gear Maker Gadget
- Will I be happy with a Desktop?
- More mother of pearl inlay............
- Find current location?
- Maker Crate
- ShopBot No Longer Being Recognized
- HELP Temp fix static needed
- Introducing myself and bit question
- Need bit advice
- spindle speed readout
- T-slot table clamps
- Desktop Jigging--Pics?
- Using a Fein shopvac for dust collection
- only half the design cutting when tiling
- kill the alligator (clip)
- I need advice relating to Shopbot Desktop vs Shark Black Diamond CNC'S
- ShobBot3 Error Msg
- Vcarve problem
- replacing X axis proximity switch
- ShoBot Indexing
- Looking for a windows computer
- Machining ceramic
- cool clamping setup
- Shipping crate size
- Desktop Speeds
- cutting carbon plate
- Exploring The Desktop
- Machine maintenace?
- New Desktop Coming!
- Uninterrupted Power Source?
- So I can cut brass, but should I?
- DeskTop Y-axis rail covers
- Unique Opportunity to buy Dual Spindle DT Tools
- Arkansas Desktop owners
- Shopbot vs. Rockler Shark HD 2.0
- Modelling with Aspire - Sydney Opera House
- What is this small part on the Shopbot Desktop?
- 3" Gecko G250X
- z-axis resonance
- Partworks 3D Issue
- "L" shape hold down
- Z axes Not moving
- Cutting Aluminum Panels
- error message: reset stop switch
- Dust Enclosure
- Noise during motion
- New Desktop owner with question
- Missing files mentioned in Quick STart Guide
- Any word on a z-axis upgrade kit?
- Spindle acting erratically
- Tiling/Surfacing bow out of warped slab?
- Carving Question
- Software and Dust collection
- Post Processor
- Changing Home Coordinates
- VCarve Slope Gadget
- Cutting Issue
- Chip Load Calculator
- What Caused This?
- Babysitting the machine
- Milling thin brass with thermoplastic tooling wax?
- Desktop movinig table
- Do 5.5"Z Desktops have upperZ prox?
- Upgrading from the 4" to the 5.5" z axis
- Interesting mistake with no initial consequences
- HDU Foam
- New desktop owner
- Router or Spindle?
- Desktop with 9.5 inch Z modification
- Feed Rates in Aspire
- Before I UR
- dust collection
- New 4 part spoil board
- Anyone using the SB Desktop in a home office?
- Desktoppers who work with hardwood - can you share cut times?
- Full enclosure for SB Desktop? Can't find much info online
- Vacuum table
- Vacuum Table
- Z-zero
- Questions about Speed & feed for hardwoods
- Considering CNC Router for RC Yachts
- shopbot vs handibot whats best for a newbie to CNC
- Aspire on the desk top
- 32 bit or 64 bit? on Desktop
- Homing Machine
- testing for user
- When did you last check bolts!
- Slip on safety
- SHOPBOT Desktop Offset Question
- Desktop Jamming and Making Aweful Noises
- Diamond Drag---offset mounting?
- Desktop Stops in the Middle of a Cut
- File for DIY MDF Deck
- Need a recommendation
- Spindle shroud after 5.5" Z MOD ?
- Zeroing out XY and Quick Jig for SB Desktop
- Bill Young's Wedge Top Questions
- Cutting small parts in very thin stock
- Desktop Mini Enclosure?
- Dust Hose
- ShopBot Problems Continue
- Squaring the Desktop bed?
- Cutting on an angle
- Pen Turning / Vinyl Stickers
- New ShopBot Desktop owner - what should we get for dust collection?
- Turning off spindle before changing bits?
- Problems with Desktop
- Changing RPM on VFD and in software?
- Alignment Pins
- Anyone use a photo-tachometer to measure Router RPM?
- Surfacing gone bad
- Broke two bits in a day - does the collet need to be changed?
- Drilling lexan
- Repairs
- solid guitar bodies,,,
- Programmign problems
- Error MSG
- Desktop Transport
- Old Post
- Tiling Toolpaths with Feed-through
- Z axis Slow movment problem
- Desktop Indexer
- Copying an existing relief
- Desktop losing Y zero position
- Spindle making whining sound
- VAcuum Table
- Z height question
- Wpc question (g54,g55,g56)
- X axis proximity switch fell off
- Desktop Vacuum Table Ideas
- PartWorks3D + working on the diagonal
- Some Frustration Points of using Aspire, Shopbot Desktop and a Wide Z Project
- Feed Rate vs Toolpath
- runtime error 9 - subscript out of range?
- Aspire problem
- How to analyze non-specific errors
- what Grease Gun to use on "DESKTOP"
- Windows 10
- Z-axis Skip during 3D cut
- Payback?
- Tiling
- Newbie trying to figure out Onsrud Feeds and Speeds - Cant find the data
- Spindle warm up question
- Shopbot dust foot spacer
- Apire Question
- Movie About the Z-axis Skipping
- cutting gasket material
- Pats Desktop Vaccuum and Dust Collection
- Help with Vcarve/shopbot software/jig... yep im new :)
- Desktop Max
- Desktopo questions
- Need Help Troubleshooting a Problem
- 1/8 BN setup question
- Spindle option
- Hz to RPM chart
- Up Date on EF Error
- Z-Zero Plate & Clip Failing to Trigger Input(s) on New ShopBot Desktop
- Over Heating Spindle
- Hold down questions
- V carve pro question
- X & Y zero keep changing its location?!?!
- zeroing x,y not working:
- Shop botters in Charlotte nc?
- Shopbot Desktop Cost in Canada
- Desktop Max
- USB Connection Issue
- Power off procedure
- Better cut time estimates
- Aspire rendering question
- DeskTop Indexer
- Setting up FTC (Fast Tool Change) on Desktop?
- Running multiple tool paths on one job (V-Carve)
- Is the spindle speed software controllable?
- Router won't turn on, then error "not enough axes designated for a command in use..."
- Intro and dumb questions about Desktop Max
- Tool Data Base
- SHOPBOT software and WIN 10?
- Trouble with Zero-XY
- Desktop Spindle speed changing on it's own
- Ordering a Desktop
- Desktop v. dust top