Shopbot logo

[jerry_stanek]

Is there a way to mirror image the demo Shopbot logo?

[bcammack]

Lateral thought:

Reverse the sign on your X-axis step value, set 0/0 at the corner opposite the normal 0/0 on the X-axis, and run the sbp file you have now.

I cannot think of any reason that should not work.

[jamesgilliam]

If you have V-Carve Pro bring it into it and there is a tab that will let you do that.

[bill.young]

Hi Jerry,

I think the easiest way to mirror something is to run the file normally with the [FP] command, but when the fillin sheet appears type "-1" in the Proportion box for that axis. If you want to mirror the logo in the X axis it would look like this:


9107

and the file would be mirrored in X axis like this:


9108

Bill

[srwtlc]

It's nice to have a drawing that you can flip (scale too) and generate your own file with. ;-)


9111
9112




9109 (10.0 k)


9110 (22.0 k)