PDA

View Full Version : New Shop Door



khaos
01-04-2010, 10:36 AM
So, the guy that built the original shop had the wisdom to use an inside door for the main entry. I wanted a new more capable and solid door. Here is the result. Stained and sealed the main color then cut.

2026

After secondary stain/seal and on the hing.

2027

Entry system.


2028

phil_o
01-04-2010, 10:45 AM
Well done, I'm sure it's very impressive live.

khaos
01-04-2010, 11:01 AM
It weighs about 100 pounds. Its quite a beast. The panels are all glued together then screwed down to the table. I let it dry for a few days. Cut the door profile. Removed the screws and waste then I planed both surface to get it flat and the thickness I needed.

The design is a Star Wars Empire Emblem and a Tribal design that I spent a lot of time on.

john_l
01-04-2010, 12:36 PM
Goog job Joe. I have that same entry system!