Rotary Eggs

[bob_dodd]

Just thought I'd post a couple of pictures , got the grandchildren coming this weekend for the egg hunt , so being i have an indexer , thought I'd give eggs a try.To those interested , To hold the eggs in the indexer I mounted 2 rubber tips (5/8") that you might put on a table leg bottom , with the hollow side towards the egg . This seems to hold the egg well. Thanks to Bill Young for the info on this project. OK lets get all those indexer out of the boxes

[scottbot]

Hey Bob
Those are cool.
That's a good idea for a newbie to use for a first attempt at using the indexer. If I ever get mine set up I think I might try eggs first. We've got a bunch of chickens so I'll have lots of material to play with.

Happy Easter!

Scott

[jdervin]

Cool!
How did you compensate for irregularities between the eggs?

[widgetworks_unlimited]

@John

Our Plotter Pen Bit can compensate for the irregularities in the eggs (it can also compensate for problems with spoil board flatness/variance in material thickness.) Many of the folks on this forum have come up with creative uses for them...

The bits are available through ShopBot or directly from our website:
www.WidgetWorksUnlimited.com

Not sure if Bob is using our bit in this example - just trying to pass along info in case it is helpful.