PRT and 3.6.14 Control Sofware [Archive]

pat_wardell

03-31-2010, 01:02 PM

Hi,

Will a PRT work with the 3.6.14 control sofware? Would it require a firmware upgrade etc?

Thanks,
Pat

ken_rychlik

03-31-2010, 01:46 PM

If you have the upgraded 4g board or if is an Alpha it will work. Firmware should always be updated with a new version.

Kenneth

pat_wardell

03-31-2010, 01:49 PM

Thanks for the info. Not 4g or Alpha. Will go to 4g as economy improves. Thanks...