File Go To function

[dubliner]

For the life of me I cant get the file to run to or go or go to, a line in the file where I broke a bit. I move to the point on the table, so it will start at a safe place in the file but I can't get any configuration of selections to start the file where I want it. I,m so confused I gave up for the night, that on top of getting terrible cut edges in .040 sign aluminum, using a variety of bits ( ones I had great success with before in .090 though), can anyone help me here? Arrgh!

[ken_rychlik]

Neville,

Can you go back to the original part file and just delete the parts that were already cut and create a new toolpath for the rest of the sheet?

It would be easier than finding the correct line to start at also.

Yes, I have had those days and had to do that.

Call a local machine shop and see where they get their bits in austin and what would work on your parts.

Then let me know too.

Kenneth

[ken_rychlik]

Click file then go to, then choose your file and it will get you there, but it will take a direct path to the point you choose, so be carefull if you go that route.

Kenneth