ken_rychlik
04-19-2010, 07:28 PM
I have the issue fixed, but wanted to pass it along to other PRS owners.
One of the bolts on the bottom rollers on the Y car became loose. It allowed the cam adjuster to pivot and it actually tightened itself up to where the y motor started loosing steps. I thought the motor was going bad at first. I took the motor off and rolled the Y car without the motor and found it.
I've herd of things getting loose on these things, but it's the first for me on something getting overly tight by itself.
Kenneth
One of the bolts on the bottom rollers on the Y car became loose. It allowed the cam adjuster to pivot and it actually tightened itself up to where the y motor started loosing steps. I thought the motor was going bad at first. I took the motor off and rolled the Y car without the motor and found it.
I've herd of things getting loose on these things, but it's the first for me on something getting overly tight by itself.
Kenneth