Cheap solid carbide bits

[ken_rychlik]

I ran across an ebay seller selling porter cable 1/4 inch solid carbide stragiht plunge bits for a very cheap price.

I bought a few and gave them a run. They cut out my prefinished plywood cleaner than my mortise compression bits. I have not cut but about 10 sheets with the first one, but even if that is all they are good for, it's worth it. It is also listed as a good plastic cutting bit, but I haven't tried yet.

I contacted him and purchased a LARGE quantity for myself, and wanted to pass along the info for others.

Ebay item number 390184767446

These are 4 bucks each with free shipping and he has some sets of 10 for 34 dollars as well.

Kenneth

[gene]

Who was it and how do we see them?
:rolleyes:

[nat_wheatley]

Kenneth,

Thanks for the post, I just bought 10. I use this type of bit all the time.


Gene,

Here's a link to the individual bits on Ebay:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=390184767446&ru=http://shop.ebay.com:80/i.html%3F_nkw%3D390184767446%26_in_kw%3D1%26_ex_kw %3D%26_sacat%3DSee-All-Categories%26_okw%3D390184767446%26_oexkw%3D%26_ud lo%3D%26_udhi%3D%26_ftrt%3D901%26_ftrv%3D1%26_sabd lo%3D%26_sabdhi%3D%26_samilow%3D%26_samihi%3D%26_s adis%3D200%26_fpos%3DZip%2Bcode%26_fsct%3D%26LH_SA LE_CURRENCY%3D0%26_sop%3D12%26_dmd%3D1%26_ipg%3D50 %26_fvi%3D1&_rdc=1#ht_500wt_956

Nat

[Allen Wagner]

Just received ten of these. I'll try them out this weekend.

allen wagner
www.wagnerwood.com (http://www.wagnerwood.com)

[geneb]

Kenneth, what feed & speed are you using with these bits?

tnx.

g.

[ken_rychlik]

3 for x and y
1/2 for z

16k on the router

KR