Work holding

[benchmark]

These look interesting

http://www.leevalley.com/US/wood/page.aspx?p=64685&cat=51&ap=3


aul

[jsooter]

Those are clever..I am going to give them a shot

[cabnet636]

if they made them to fit a t slot then maybe, but with a 1/4" travel it may be a bit limited for cnc

jim

[rb99]

Make them yourself out of wood or plastic...

RIB

[nat_wheatley]

I'd look into these:

http://blog.shopbottools.com/index.php/2007/06/meet-my-new-friend-cam/

Not sure if David is still selling parts for these, but he was at one point.

[jsooter]

Nat,

Thanks for the helpful link. Those look great

[phil_o]

Looking to contact Dave Buschbaum. I'm interested in his cam clamps. I emailed him at the address on his web site but it didn't work. Anyone Know how to contact him?

[nat_wheatley]

Here's David's site that has the cams for sale:

http://www.welcometothesandbox.com/

[phil_o]

Thanks Nat.

[geneb]

I bought a set of those clamps from David a while back and they're absolutely fantastic.
The aluminum ring is just a tiny bit thicker than the cam itself. You just tighten it down to the table and it will freely rotate. Great tool.

g.

[beacon14]

Sorry about the e-mail not working. I'm trying to get my son to migrate my websites to a host with dedicated IP addresses to eliminate this frustrating and costly problem.

In the meantime feel free to e-mail me at the address in my profile if you have any questions.

I've sold a few hundred of the cam clamps and have received only positive feedback. Thanks for the good words you guys.

[hunterland]

David What would it cost for 4 of the clamps shipped to wiscosin? Thanks Don Hunter

[wberminio]

I recently bought several of Dave's clamps and have to say-
They are great!
Simple and very effective design.
I should have bought them years ago-they would have saved me hours of extra work.

Thanks Dave
No Kidding!

[beacon14]

Hi Don,

All the ordering info is online at http://welcometothesandbox.com/. (We did switch to a dedicated IP address so e-mails and orders should come through, although you can always e-mail me at the address in my profile as well).

Erminio, thanks for the order and the feedback. I'm glad the cam clamps are working for you.

David B.