Advice and file needed...

[myxpykalix]

I really don't want to pay $150.00 for one of those cheap bathroom vanitys
that is made of that pressed wood and is junk but I don't have the time to design one myself and frankly lack the skill to do it right the first time, so i had some questions.

Being that it is going to be in a bathroom could I make this out of mdf? Will it hold up? If I can does anyone have a cut file for a vanity that they would be willing to share? Generally i don't ask anyone to share their hard work but i need to get this done. Would it be better to just buy a premade one? thanks

[wberminio]

What size are you looking for ,Jack

[myxpykalix]

Well the current sink is 25w X 22deep X 32high (with cabinet now) however from my shopping today it seems that the standard depth now on the sink tops is 19" . So if i bought a premade cabinet I would have to replace the sinktop to match the 19".

So if someone had a premade file for a 19" deep cabinet I would buy the top but if i had my "druthers" I would like to make one to accomodate the 25wX22d top that i have now, but like the old saying goes..."beggers can't be choosers"..so i'll take what i can get..thanks

[kevin]

Jack
i have a file 26 wide by 22 deep with 2 half draws will show photo

Made with 5/8 melamine stay awy from mdf

do you need will email file ?

[wberminio]

Jack I think I can help you.
I'll send you a drawing later today.If it works,we'll see if i can send you some files.
(it'll cost you :) )

BTW-MDF won't work in a bath.Use maple / Birch if you- want to paint or Red Oak ply.HD has some decent hardwood ply in now.I've used it in a pinch.

[myxpykalix]

thanks to both yes please send to my email myxpykalix@hotmail.com
This will help greatly

[kevin]

26 wide by 20 deep 28 high
shopbot file set with 3/8
5/8 thick material melamine
made with cabinet parts pro took 3 mins

hope this help if you need half draws let me know size