soda can 3d

[kevin]

I was looking at 3d clip art on vector there was no can as below

As I'am limited in time like yesterday .I don't have enough experince to do something simple with the can .
E-mail me privatley if interested to do the file
Its simple 4 by 8 2 inch thick foam with 3/4 plywood as backer just a small round over

[kevin]

the picture

[myxpykalix]

is that 4ft X 8ft? Do you want a full round can or just a part of the round of the can portruding from the sign?

[kevin]

yes a little less{so the edges are clean} than 4 feet by 8 feet

come out a little his logo will be glue on like a lable so just part

[kevin]

forgot to mention 2 thick foam leave 1/2 inch

[ssflyer]

Do you need the top shpwing, or just something like this?

[kevin]

A little of the top so I can Put a little aluimium paint maybe to make it look more like a can? if not thats fine I know 3D is a different animal!

[harold_weber]

Guys, be VERY careful handling those big drink cans. See photo. We gave this can to one of fishing buddies and he took it with him in his boat. He hasn't been seen since.

[kevin]

Thats a hoot. The can looks amazing

[kevin]

I finally figured it out I found a 3max file for soda can .Then I suashed to 2 inches looked ****
What to do ?
THEN i FIGURE OUT TO USE THE SLICE FUCTION IN PARTS WORK 3 D { I thought it was iferior software } made it 16 inches thick .Then cut the can in half to 8 inches made 4 slices 2 inches thick.

It was harder than I thought to make a can look natural 4 BY 8

Will post final photo of the real thing

Thanks for the help it was bigger than I yhiught

[kevin]

I did it at the same time I learned a little 3d max I found the can online

I used 2 thick foam x4 with plywood backing to give a realist effect