PDA

View Full Version : Thermwood Dovetail Bits Users



sailfl
06-30-2010, 06:35 AM
If you are or have used Thermwood's Dovetail Bits with your machine to cut dovetail joints, I would like the opportunity to speak with you by phone.

Would you please PM me with your phone number.

Thanks

englert
06-30-2010, 01:42 PM
If you haven't already done so, you might try going to the forum for Thermwood and eCabinet Systems. www.Thermwood.com (http://www.Thermwood.com). Go to the bottom of the web page and click on "Forums". I'm not sure about the ShopBot'rs, but there are quite a few Thermwood owners using the bit and can probably help you with any setup questions.

Dennis L. Englert