butch
07-03-2010, 01:24 PM
I just carved this pine and glazed it. Just a test project, but liked how it turned out. Going to have to add this process to several projects.
Pine - blue stain; 2inch thick, 14in high, 34in long. Carving 28x8x.65 deep; 3 1/2hours, 1/4ball nose, 10% step.
Vectric moose, cougar, forest panel. 6.2% tilt on moose and cougar to sink the feet into the grass.
Asphaltum glaze but needs a little more sanding and highlighting, but have to deliver it as is.
Pine - blue stain; 2inch thick, 14in high, 34in long. Carving 28x8x.65 deep; 3 1/2hours, 1/4ball nose, 10% step.
Vectric moose, cougar, forest panel. 6.2% tilt on moose and cougar to sink the feet into the grass.
Asphaltum glaze but needs a little more sanding and highlighting, but have to deliver it as is.