dlcw
07-07-2010, 04:18 PM
I am about to embark on using the "ShopBot_alpha_Arc_inch_Toolchange_control" PP file.
I'm looking for feedback from folks who have taken the plunge with this PP. According to Ryan at Shopbot, it uses the same C6,C7 and C9 that are used for SBLink and these are all tuned perfectly for my machine. TIA.
I'm looking for feedback from folks who have taken the plunge with this PP. According to Ryan at Shopbot, it uses the same C6,C7 and C9 that are used for SBLink and these are all tuned perfectly for my machine. TIA.