lost post processor files

[hunterland]

I'm running part works 2.505 and when trying to save the cut file get a ( invalid aurgument) error after checking it out I found that there are no post processors in the listing area. I ran a search for post processor files on my computer but it did not find any, What is the proper file name that I should be looking for? And any idea why they would be gone , It worked fine last week! Thanks Don Hunter

[ken_rychlik]

here ya go

http://www.shopbottools.com/files/ShopbotPWposts090514.zip

[hunterland]

Ken thanks for the file , one other thing How do I get them to the program I tried cut and paste , that did not work! Thanks for the help. Don

[ken_rychlik]

mine is actually v carve pro and the location is here on my pc.

C:\Program Files\VCarve Pro V5.0\PostP

It should be your partworks name in place of the vcarve pro that is in mine.

This is running windows xp pro also if that matters.

Kenneth

[beacon14]

Your PartWorks postprocessor files are probably stored in this folder or something very similar:

C:\Program Files\ShopBot\PartWorks V2.0\Postp