Drawing files needed

[gary_n]

I need to get a copy of the drawing files for a childrens rocking chair in which the parts interlock.

[rookie432]

Gary,
I"ve got that. Give me a day to dig it up and I'll post it for you.

Bill

[phil_o]

I'd like to see that also.

[gerald_d]

Bill, if you don't mind, I'd also like to have a copy too, please.

[jimmya]

any one that wants that file e-mail me and i'll send it to you

[jimmya]

I'll try and post that file here, now that I got the right one, LOL. Sorry guys that got the wrong one!!!! I resent it to those that received the wrong one. SAID FILE TO BIG
To cut this file: 1/4 ply 1/4" bit 1/2" ply 1/2" bit and so on
Jimmy

[jthelen]

Jimmy, The cut strategy must be engrave or center line for these parts. (I use Rams so I'm not familiar with the ShopBot/parts wizard terminology. )

[jimmya]

I would think that it would be a center line cut so the parts would fit together.

[jimmya]

Has any one cut the Rocker? If so how did it turn out?
Jimmy

[den73160]

I would like to have the rocker file as well.