PDA

View Full Version : Drawing files needed


gary_n
02-22-2005, 10:57 AM
I need to get a copy of the drawing files for a childrens rocking chair in which the parts interlock.
rookie432
02-23-2005, 08:11 AM
Gary,
I"ve got that. Give me a day to dig it up and I'll post it for you.

Bill
phil_o
02-23-2005, 08:53 AM
I'd like to see that also.
gerald_d
02-23-2005, 08:57 AM
Bill, if you don't mind, I'd also like to have a copy too, please.
jimmya
02-23-2005, 09:23 AM
any one that wants that file e-mail me and i'll send it to you
jimmya
02-23-2005, 10:09 AM
I'll try and post that file here, now that I got the right one, LOL. Sorry guys that got the wrong one!!!! I resent it to those that received the wrong one. SAID FILE TO BIG
To cut this file: 1/4 ply 1/4" bit 1/2" ply 1/2" bit and so on
Jimmy
jthelen
02-23-2005, 05:02 PM
Jimmy, The cut strategy must be engrave or center line for these parts. (I use Rams so I'm not familiar with the ShopBot/parts wizard terminology. )
jimmya
02-23-2005, 07:08 PM
I would think that it would be a center line cut so the parts would fit together.
jimmya
02-26-2005, 06:13 AM
Has any one cut the Rocker? If so how did it turn out?
Jimmy
den73160
03-13-2005, 01:57 AM
I would like to have the rocker file as well.