best glue for styrofoam?

[myxpykalix]

I need to glue some pink styrofoam together to make a volcano and don't know what glue would be the best to do that with?

[sailfl]

You are like a newbe, did you do a search. There was a discussion about glue.

[bryson]

Jack, I use a light coat of 3M Spray 77.
Bryson

[myxpykalix]

no, i didn't....I guess after answering over 3,000 posts and repeated questions (probably even some that you have asked) that were previously asked/answered here, I wanted to get a quick up to date answer and didn't want to wade thru hours of back posts. Sometimes i ask questions for affirmation of what i think is the right answer.

I don't believe in the "reinventing the wheel" way of doing things, when you have this VAST knowledgebase and experience at your fingertips which will keep you from wasting time and material.:rolleyes:

[John David]

Gorilla glue Should work. Ive used it on other foams for carving
. only problem is its take longer than contact type glues
JD

[jdervin]

Jack--

Here's one of the previous threads...
http://www.talkshopbot.com/forum/showthread.php?t=8270

Also, you'll find some good advice on sticking things to other things here...
http://www.thistothat.com/

[coach]

Jack, the best adhesive for foam is called Enerfoam.
I have used this on the last 2 projects and it holds fantastically.
It expands and is set up in a short time.

[feinddj]

in the motion picture business, we glue up a lot of foam. the main issue is always time.

Spray 77 by 3m is fast but doesn't hold as well.

Gorilla glue holds well but needs a while to set.

Spray insulation will work (its just foamed gorilla glue) and sets faster

Hilti makes a foam insulation product that works very well.

3m also makes a water based contact adhesive that makes a good primer as well as an adhesive.

David