Emergency Stop Error

[Dranos]

Hello everyone,

I was in the process of using my shopbot when input 4 started flashing. I cannot proceed with any work as it seems the emergency stop has been activated somehow.

I have tried hitting the space bar and the physical emergency stop button but none seem to resolve the problem. The software tells me to 'reset tool stop button' but I don't know where to go to do that.

Please help!!!

[jerry_stanek]

check to see if your E stop cable is connected or broke

[Dranos]

My emergency stop button has never really worked. We just got by using the space bar. I plan to have my technician find out why the button doesn't work.

We were able to operate the machine fine without it and the cable still seems intact.

I don't know if this is related but at the same time we had this issue, I noticed that there was no sound when I turned on the main power switch. You cant tell the machine is on unless you look at the power supply.

Is this related to the 'Tool Stop' issue I'm facing?

[jerry_stanek]

The shopbot software has changed the input mode of input 4.