coach
11-11-2010, 09:57 PM
Hey guys, I build 90% frameless cabinets and use frameless euro hinges. I use Mepla hinges that fit hinge machine.
I have used face frame hinges but never liked how much the hinge side was off the face.
I bought some of the face frame hinges that fit my machine figuring I had lousy hinges. I had the same results.
I finally put a spacer in the cabinet and mounted the frameless plate to that. Door was adjusted and fit perfect in about 5 minutes.
I spent over 2 hours trying to get 2 doors adjusted on a SB 36 with the f/f hinges. These had 2 adjustments on them.
I would like to use f/f hinges as I can save $1.00 per hinge.
Thanks for any help you can offer.
Dave
I have used face frame hinges but never liked how much the hinge side was off the face.
I bought some of the face frame hinges that fit my machine figuring I had lousy hinges. I had the same results.
I finally put a spacer in the cabinet and mounted the frameless plate to that. Door was adjusted and fit perfect in about 5 minutes.
I spent over 2 hours trying to get 2 doors adjusted on a SB 36 with the f/f hinges. These had 2 adjustments on them.
I would like to use f/f hinges as I can save $1.00 per hinge.
Thanks for any help you can offer.
Dave