Post processor ?

[dvmike]

I now have our PRT96 running , and communicating ! YIPPEE !:D

I have another issue now that I understand,but need some assistance with.
I am using Aspire and it doesn't support a post processor for the PRT96.
Does anyone have a PRT machine that they can copy and e mail me a post processor? If that is possible ,I would greatly appreciate it !

mike@agmsigncompany.com

[myxpykalix]

I don't know about this particular program but i think the post processors are made for individual manufacturers so the post processors for the shopbot can be used for a buddy48 or a prt, or prs. Does it have a pp for "shopbot_arcs_inches" or something like that? I think that is what you would use.

[jerry_stanek]

You just use the pp for shopbot arcs. inches and it should work. My old version of my PR ran that.

[feinddj]

I use the shopbot Arc inches with speed on my prt with a speed control