PDA

View Full Version : Indexer Value Units



kubotaman
11-27-2010, 01:19 AM
Okay guy's my computer is being replaced so I have to enter all of the value units including the B drive. I have the 12" indexer so when I set up by way of the cd the value units are incorrect for the B drive. It set the units to 13.-- when with the 12" indexer they are closer to 54. The indexer turns exactly 360 degrees when told to do so, but when asked to jog it turns closer to two full revolutions! I must have a setting incorrect but can't figure out which one. Can anyone shed some light on this subject for me? Thanks!

steve_g
11-27-2010, 01:45 AM
Once when I had my "Resolution Multiple" setting wrong on my Z axis, it caused actual distances to be different for move commands than for jog commands. Hope this helps

Steve

kubotaman
11-27-2010, 03:41 PM
Steve I changed my resolution from 1 to 5 and that cured my problem. Thanks!