PDA

View Full Version : Soft Ware upgrade


matney_models
12-05-2010, 05:32 PM
What is a good soft ware upgrade for running or cutting the Bot?
gundog
12-06-2010, 12:48 AM
Hi Kevin,
I am not the guy to answer you question but I think you need to provide some more info for any of the smart guys on here to help you.

What soft ware do you have now?

What do you do with your machine? 2d 3d Etc

Mike
butch
12-06-2010, 10:00 AM
I use Aspire. It provides everything I need to make everything from kitchen cabinets to toys.
chiloquinruss
12-06-2010, 11:28 AM
Aspire
1. to yearn (for) or have a powerful or ambitious plan, desire, or hope (to do or be something): to aspire to be a great leader.
2. to rise to a great height

That's the dictionary definition, using Aspire will certainly raise you and your projects to a greater height. As you can tell I love it! LOL Russ
matney_models
12-10-2010, 02:42 AM
What is the difference between Aspire and ShopBot 2.5?
adrianm
12-10-2010, 04:13 AM
What is the difference between Aspire and ShopBot 2.5?


This table outlines the differences:

http://www.vectric.com/WebSite/Vectric/software_comparision.htm

Note that PartWorks (ShopBot) 2.5 is the same as VCarve Pro.
steve_g
12-10-2010, 11:25 AM
The chart does not show Vcarve pro to have the ability to do 3D machining, Multisided 3D machining, or 3D slicing. Partworks 3D can do all of those.


Steve
adrianm
12-10-2010, 12:12 PM
The chart does not show Vcarve pro to have the ability to do 3D machining, Multisided 3D machining, or 3D slicing. Partworks 3D can do all of those.


Steve

PartWorks 3D is the same program as Cut3D which is on the chart.