Pattern Needed

[kubotaman]

Where can I either buy or obtain a pattern for a Pinecone? I want the pattern for the top and not necessary the body itself. I want to use it on my indexer for making a pinecone . Thanks!

[myxpykalix]

I was going to suggest you ask here:
http://www.cnczone.com/forums/general_metalwork_discussion/19346-share_your_files_part_art-589.html

but upon re reading, what you want is a 3D file not a 2D file and that mostly is for 2d fies. It wouldn't hurt to ask though.

[ssflyer]

While not a pine cone, osbourne's acorn finial may be close enough to what you need, or not :D You can download 3d models of their products...
http://www.osbornewood.com/product/3010.cfm (http://www.osbornewood.com/product/3010.cfm)

Ron

[myxpykalix]

The only problem with their models is they have them there for you to check out but the quality of the models is not good enough to carve. Look closely at them, the quality sucks.