Interior Office Signs

[toe_jam]

Okay as you see below with the "Granite & Glass" posts what i'm doing are some interior office signs. Some need to be ADA Signs. I have a couple questions i'm hoping some people can answer.

1. If I decide to cut small shapes and engrave names out of small granite tile, say 8"x8" can I just stand there with the router with a mister or do i need to install the mister i bought through shopbottools thats on my shelf collecting dust? OR is doing somethign so small not ever require water. These shapes are approx 3"x4"or5" @1/2" Thick that I will be cutting out. Not very big IMO

2. ADA Signs. I have skimmed through the ADA guidlines and I have a general idea about it. But where do I buy Tactile?
-a. Where do I buy Braile?
-b. Is there software out there that measures out the braile? Or is it done by hand?
c. Where would I get a bit to cut the braile for the tactile?

I'm googling these questions and I can't find anything

[itemphoto@yahoo.com]

Erik,
The link below is for a site that will let you download braille font. Hope this helps.

Kevin
www.tsb.k12tn.net/TSB_Website_folders/Vision/braille_font.htm (http://www.tsb.k12tn.net/TSB_Website_folders/Vision/braille_font.htm)

[robtown]

Gerber makes a set of bits for ADA engraving, You can also get them at Reece supply, google gerber router bits you should be able to find them.
http://www.gspinc.com/products/routers/bits_gerber.html
I've done ADA braille on my PRT96, you can also buy photopolymer for this but that's a whole other process. Let me know if you need anymore advice or help.

[toe_jam]

where do I buy tactile from? No Sign Suppliers here in SoCal Sell it

[toe_jam]

Okay found one locally. I had the name wrong i guess, tactile is a real generic name for the material. Thank You all for your help