steelcnccutter
05-24-2011, 10:54 PM
yes it is small but it works and now to try the full size chair. the program is fun and needs some improvements but is in eary stages. I do not do puzzles very well so I almost had to call a kid from around to do it but I got it. I gave it the name Elvira because that was the scary part getting it together. I cut it out of 3mm pvc foam board with a 1/16 bit. it is about 8 inches tall and 4 7/8 wide. it is very sturdy when it goes together. i made it curve in to the seat so that is why it took a little thought to put it together. if it were flat I think all the slats would be the same. I think a pool chase would be neet. maybe that needs to be the full size chair.