PDA

View Full Version : First flight...



geneb
07-07-2011, 01:17 PM
http://www.youtube.com/watch?v=Bx5eb5yTDQw

Nothing left to do but tweak the pre-warp map and edge blending. :D

g.

pappybaynes
07-07-2011, 01:34 PM
There is no video

geneb
07-07-2011, 01:43 PM
I just clicked on the link and yes there is. :) Do you have Flash installed? It's required to play YouTube video.

g.

ssflyer
07-07-2011, 02:22 PM
Excellent! I'm jealous! :p

Ron

CNYDWW
07-07-2011, 02:24 PM
I'm not into flight simulation however this video makes me consider building one. Very cool stuff.

Regards
Randy

geneb
07-07-2011, 03:36 PM
You know you need another hobby, right? :)

g.

kevin
07-07-2011, 04:02 PM
way cool

thats amazing !!!

myxpykalix
07-07-2011, 11:04 PM
After watching that I feel like one of the "Wrong Brothers"
http://www.youtube.com/watch?v=l7P2Dl_M7DY

I've watched this thread and you have put a lot of work into this project. Those little inperfections you point out aren't that big a deal and the result makes you feel like you are in the cockpit.

It has been years since i played them but there was some fighter jet games. I'd love to see some ariel dogfight jets on here. Good Job!:eek:

gene
07-07-2011, 11:46 PM
Thats just too cool! What does it look like if you crash? LOL:)

Brady Watson
07-08-2011, 09:11 AM
Gene - That is awesome!!!

Isn't it nice to see your dreams in the physical world, finally?

-B

geneb
07-08-2011, 10:32 AM
It's been a hell of journey, that's for sure. This display isn't so great for dogfighting - there's no view "above" you, so looking up doesn't gain you much. I'm going to try it with a TrackIR unit (it's a head-tracking device) to auto-pan the view to see how that works in air-combat games.

Brady: Now that this one is done, I have to build the second one. :) That will be a much faster build since we dealt with all the "growing pains" building the first one.

g.

bleeth
07-08-2011, 11:19 AM
I really enjoyed the test flight Gene. A really excellant job.
First prototype is an adventure.
Second one fixes most the problems.
Third one is everything it should be and built efficiently to boot.
Fourth one is boring!!

br928
07-08-2011, 11:58 AM
Gene,

I have been looking on DIYDRONES.com. Your rig would be awesome for FPV (first person view)! After looking into the Arduino you are using, theses guys applications are amazing. The ArduPilot Mega is just mind blowing. I ordered a Arduino starter kit to begin learning the processor. The ArduPilot Mega is next!

geneb
07-08-2011, 06:10 PM
It's already on the list Stan: :) See http://www.youtube.com/watch?v=fiL41-51Duo - that's a test run of some software I wrote to control an R/C model from a PC. I've got a special interface box that allows me to plug a computer into the trainer jack of a standard R/C transmitter and drive it directly.

I cut the EZ Pod kits that RangeVideo sells for the EZ Star. :)

I'll need to custom build a model that will allow me to place three transmitters on board for the three cameras I'll need to use...that's the cheap way to go. :)

Does the ArduPilot have an integrated OSD?

g.

myxpykalix
07-08-2011, 06:51 PM
Gene,
It sounds like the "growing pains" are with you!:D What i love is we all are now able to get into some of the things we couldn't do as kids!

Thats why you see us into RC planes or railroads. This is really cool. I went to your youtube link where it looks like you had a joystick controlling a camera.
I'm not sure you referenced this but what would be REALLY COOL is if you could set up a motion control where the camera is controlled by the movement of your head similar to how the apache helicopter pilots control aiming of their guns.

They have sunglasses that have video screens in them where you could see what is being fed to the camera.

Frankly it might just be easier if you just went and took flying lessons and experienced it firsthand, but thenagain you couldn't push the reset button and start over in the event of a crash:eek:
Keep showing us your progress.

br928
07-08-2011, 08:20 PM
Does the ArduPilot have an integrated OSD?

g.

You need to spend a few hours on their site like I did. I am sure that you can gleen a lot more information than I did. To get OSD I think you have to add a full telemetry kit using Xbee modules. I think it has a 1 mile range.

geneb
07-08-2011, 08:29 PM
Jack: I've got a device called a TrackIR that I can use to control the camera's pan/tilt mechanism. It's a head tracker meant for gaming, but they have an SDK you can use to interface to other things. The company I make the EZ Pod kits for also sell the LCD glasses you're referring to. I already have a pair. :)

Stan: There's some guys in Spain that have pulled a 120km range out of their system. It works at 828Mhz or something like that. If you take a look at the FPV forum over at rcgroups.com, you can see the thread they have going on about it.

g.

Brady Watson
07-08-2011, 09:53 PM
Gene,

I have been looking on DIYDRONES.com...

Dude...totally!!! I also like the camera tracking paintball sentry (http://www.paintballsentry.com/Videos.htm)...y'allve seen that one, right? Great way to keep deer out of my tomaters :D

-B

Acmeaviator
07-08-2011, 10:53 PM
Gene that looks great! I've never seen the virtual cockpit used on a projected screen - only projected views with the gauges on hardware panels or on secondary screens inside the simpit itself. Will you be using the projected virtual cockpit once you finish or just for testing?

mtylerfl
07-09-2011, 09:43 PM
Gene, I am practically speechless. What a great undertaking and so much FUN to watch your progress all the way to the finished result! Simply awesome!

geneb
07-11-2011, 11:03 AM
The virtual cockpit was just present for testing - it won't be there once I get around to building a cockpit to fit within the confines of the display.

g.

michael_schwartz
07-11-2011, 06:01 PM
That had to have taken quite a bit of engineering to pull off. Certainly impressive to say the least.

geneb
07-12-2011, 12:21 PM
"Here at TopGeek, we've got a tame aerospace engineer. Some say he picks his teeth with a sliver of rib from the last accountant that tried to cost-reduce one of his designs. All we know is, he's called Wayne." :D

(without whom, this project never would have happened.)
g.

geneb
07-13-2011, 10:28 AM
Here's a short video showing a run using the game Need for Speed:Shift and my friend Dave's rather enthusiastic reaction to it. :D
http://www.youtube.com/watch?v=_cyJIGII6JE
g.

ssflyer
07-13-2011, 10:36 AM
Damn Gene... Now I know I can't build one! My son and I would never get anything else done! :D

Ron

Brady Watson
07-13-2011, 12:10 PM
That's hot snot right there!!!

Are orders stacking up yet or what???!!!

-B

geneb
07-13-2011, 12:15 PM
Heheh. Thanks Ron. :)

Brady, I couldn't sell them even if I wanted to. The display design uses a technique that is currently under active patent. I'm hoping to hear something soon regarding that, but we may never be able to release the full design because of it.

g.