laconcepts
09-03-2011, 09:53 AM
This is our table fabricated for the 917th Fighter Group Commander at Barksdale AFB in Louisiana.
Material used is 8qtr African Mohagany, 1/2" 7075 T6 Alum, Scrap A-10 Thunderbolt 30MM gatlin gun barrels for the legs and Envontec bartop Epoxy.
All programmed with Aspire. Wood was machined on our PRT 48X96 Shopbot, and the Alum was Machined on our Fadal 4020 Machining Center.
3 Coats of Bartop epoxy buries everything.
Pretty fun project,
Kelly
Material used is 8qtr African Mohagany, 1/2" 7075 T6 Alum, Scrap A-10 Thunderbolt 30MM gatlin gun barrels for the legs and Envontec bartop Epoxy.
All programmed with Aspire. Wood was machined on our PRT 48X96 Shopbot, and the Alum was Machined on our Fadal 4020 Machining Center.
3 Coats of Bartop epoxy buries everything.
Pretty fun project,
Kelly