Partworks 3.0 PostP

[jimboy]

I have a question that is surly obvious but… I normally use Aspire for all my design work but on occasion have used PartWorks 3.0. My question is where are the Post Processers located? My install is to C:\programs files\partworks 3.0 and that location does not contain a PostP directory. Only two Posts listed are TC(inch) and TC(mm). I normally use Shopbot (Arcs) (Inch) in Aspire.
Jim

[harold_weber]

This is where my postprocessors are for Aspire 3:

C:\Documents and Settings\All Users\Application Data\Vectric\Aspire\V3.0\PostP

Maybe the path for Partworks is similar (I don't have Partworks)

[beacon14]

From within PartWorks look at the File/Open Application Data Folder command. It will open Windows Explorer (is it still called that?) with the file structure open to the folder Harold refers to.

[jimboy]

David thanks, I knew it was a simple fix. Aspire PostP is in Programs/Aspire so faulty thinking had me looking there. Thanks again
Jim

[adrianm]

It's best to use the menu item that David refers to as the location of the folder is different depending on the version of Windows you're using.

[wberminio]

In partworks3 go to file -click on open applications folder-PostP