cedar trade show sign

[dan_nelson]

pretty basic but came out well, 2.5 hrs to machine .25 ds bit

[knight_toolworks]

looks good. though if you did the letters seperalty from the background it will save you a lot of time.

[dan_nelson]

how true ,however the client supplied the cedar and only brought me 2 2x12x60 that I had to glue

[knight_toolworks]

how true ,however the client supplied the cedar and only brought me 2 2x12x60 that I had to glue

that will do it (G) on placing the letters on somethign liek that I would use a small bit ru naround the inside of the letters to mark them. orp ocket them out but that takes extra time. finshed stuff I would use a pen.
I did a push through acryic sign the same way. all the time wasted removing the extra material.