frogwood
03-19-2012, 06:13 PM
I have a request from someone to make some large decorative porch brackets at approx 26 x 26. I make smaller sizes in wood but concerned that this size is large enough to potentially have some problems. I could use .75 pvc sheets. Anyone have issues with this material? expansion a problem?
I have never used Extira. Would this hold up outside with various cutouts exposing a lot of edge surface?
Anyone have any other material ideas? Duraply would probably do. Again
a lot of edge and painting.
Also anyone have a good source for the pvc sheets. Looks like in my area it is about $140 a 4 x 8 sheet.
Thanks ahead of time guys for your opinions.
Allen
I have never used Extira. Would this hold up outside with various cutouts exposing a lot of edge surface?
Anyone have any other material ideas? Duraply would probably do. Again
a lot of edge and painting.
Also anyone have a good source for the pvc sheets. Looks like in my area it is about $140 a 4 x 8 sheet.
Thanks ahead of time guys for your opinions.
Allen