oddity

[2006prt]

I just got the link up and running. It is cutting good parts, the issue I have is the table surfacer tool keeps popping up when I load a link file. At the the end of the job I have half a dozen surfacer windows open. It does not seem to be causing an issue, it just seems odd to me. Has this happened to anyone else?

[zeykr]

Have you got the table surfacer set up as a custom cut?

[garyc]

Todd...

Have you made anu entries to the header or footer entry areas? If so check them and make sure that there is nothing that resemble "TU"
If not, can you send me an export of the last file that did this?
1) Load job
2) Press export button in lower right of main screen
3) email to gary.campbell (at) shopbottools (dot) com

There should be no TU commands output from the link.

[2006prt]

Gary,

The only thing I can find with a Tu is the " turn on dust collector and turn on vac in the header

would the tu in turn cause it?

Thanks for the help
BTW ecabinets and the link are awesome, the machining is great even on a prt.

[garyc]

if there is not an apostrophe in front of it ( ' )

[2006prt]

Thanks Gary that's it no '