tool numbering

[chunkstyle]

Would anyone be able to point vme to where the tool numbering information can be found. I know I read it but cant locate the information. Building a neww tool bit holder for the machine and wanted to know if I'm restricted to 11-19 on a standard PRS running 3.6.44.

Thanks
Tim

[adrianm]

These are the comments from the top of MTC (manual tool change routine) which show the tool numbers used by the default routines.


'Head 1 (Z) tools are #1...#19
'Head 2 (A) tools are #21...#29
'Drill 1 (Z) tools are #31...#39
'Drill 2 (Z) tools are #41...#49
'Drill 3 (A) tools are #51...#59
'Drill 4 (A) tools are #61...#69

[chunkstyle]

Thanks Adrian,

That seems obvious now that you pointed it out to me. Thanks for the help

Tim