JDaVinci
08-17-2012, 01:23 AM
Sorry I'm posting a lot, I've just recently had some time to share some projects. We are entering our busy season and so I wanted to get these posted while I can.
We made this book for a Safety education program for kids, sponsored by our local utility company.
The video shows it while it was still a work in progress. But some of the pictures are more complete.
The book was cut from plywood, and other lumber, while the interior reliefs on the 'pages' was cut from EPS foam after being modeled digitally. The pages were toolpathed using Vectric Cut 3D. And the most of the cutting was done on the ShopBot.
http://www.youtube.com/watch?v=mtcyHSzV4NQ
We made this book for a Safety education program for kids, sponsored by our local utility company.
The video shows it while it was still a work in progress. But some of the pictures are more complete.
The book was cut from plywood, and other lumber, while the interior reliefs on the 'pages' was cut from EPS foam after being modeled digitally. The pages were toolpathed using Vectric Cut 3D. And the most of the cutting was done on the ShopBot.
http://www.youtube.com/watch?v=mtcyHSzV4NQ