myxpykalix
09-12-2012, 02:45 AM
www.cambiummachines.com
Cambium Code is designed to save you large amounts of time by generating cutter paths based on just a handful of parameters. No CAD data is required.
Mortise and Tenon
Half-Blind Dovetails
Sliding Dovetails
Dados
Straight Grooves
Circular Pockets
Hinge Pockets
Cambium Code Standard is free to evaluate for 30 days. Watch a demonstration creating half-blind dovetails below.
I d/l'ed the demo but haven't installed it since i'm going out of town next week and its a 30 day demo. It's 30 bucks to buy and generates regular Gcode but you should still be able to run it on the bot. If anyone trys it let us know what you discover.:D
Cambium Code is designed to save you large amounts of time by generating cutter paths based on just a handful of parameters. No CAD data is required.
Mortise and Tenon
Half-Blind Dovetails
Sliding Dovetails
Dados
Straight Grooves
Circular Pockets
Hinge Pockets
Cambium Code Standard is free to evaluate for 30 days. Watch a demonstration creating half-blind dovetails below.
I d/l'ed the demo but haven't installed it since i'm going out of town next week and its a 30 day demo. It's 30 bucks to buy and generates regular Gcode but you should still be able to run it on the bot. If anyone trys it let us know what you discover.:D