TJ
10-17-2012, 01:06 PM
Wednesday at 1:00 there will be a 2.5 hour session with a topic of "Common Toolpathing with Optimization"
Instead of just adding a profile toolpath, optimize that with the correct size tabs, ramps, order, etc...
Toolpath operations Profile, Pocket, Drilling V-Carve and Fluting will all be shown and picked apart to help the users optimize their toolpathing.
1. Please join my meeting.
https://global.gotomeeting.com/join/736691909
2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.
Dial +1 (213) 493-0614
Access Code: 736-691-909
Audio PIN: Shown after joining the meeting
Meeting ID: 736-691-909
Instead of just adding a profile toolpath, optimize that with the correct size tabs, ramps, order, etc...
Toolpath operations Profile, Pocket, Drilling V-Carve and Fluting will all be shown and picked apart to help the users optimize their toolpathing.
1. Please join my meeting.
https://global.gotomeeting.com/join/736691909
2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.
Dial +1 (213) 493-0614
Access Code: 736-691-909
Audio PIN: Shown after joining the meeting
Meeting ID: 736-691-909