View Full Version : Drilling holes with compression bit
Bob Eustace
10-17-2012, 11:29 PM
Is it wise to drill 6.5mm holes in 17mm MDF using Centurions 1/4" compression bit.
Thanks - Bob
ssflyer
10-18-2012, 12:21 AM
Hmm - that's only 1/64" under the 6.5mm. It may work, but I'd do it with a profile inside toolpath with a spiral ramp.
Bob Eustace
10-18-2012, 03:41 PM
Thanks Ron - worked a treat!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.