Move Speed

[Jerome]

Had a comm error yesterday and when I restarted my move speed had been changed to .2. Running the c3 routine took forever so I changed it to .5 then to 1.

That seemed about normal. Does anyone know what the default move speed is for a PRS Alpha?

Thanks
Jerome

[garyc]

Jerome...
From the console: [U][R] and select reset

[Jerome]

Thanks Gary.

I have an ATC will this reset affect any of the settings for the tool changer?

[garyc]

Jerome...
There are some ATC specific settings, most with the input/outputs of the interface board. These are explained pretty well in the ATC instsallation manual.