nodnerb
09-18-2007, 11:35 AM
New user and installation here of a 98"x48" prs alpha. I have a few question just to get started with this machine. Any help would be greatly appreciated.
1) I can't seem to get the router to turn off. No matter what I enter using the SO command. The router has power the second that reset is pushed after turning on the control box. Should there actually be something hooked up to the 1 and 4 inputs/outputs on the motherboard? What am I missing?
2)Whenever I try do a manual cut using the CA(cut arch) command, for example, the y car and sometimes the x car go past the limit switch and stops, giving the "limit switch hit" error. This happens even though the machine is zeroed in x and y. It also happens whenever I try run any of the sample spb files as well.
Thanks for any help!!
1) I can't seem to get the router to turn off. No matter what I enter using the SO command. The router has power the second that reset is pushed after turning on the control box. Should there actually be something hooked up to the 1 and 4 inputs/outputs on the motherboard? What am I missing?
2)Whenever I try do a manual cut using the CA(cut arch) command, for example, the y car and sometimes the x car go past the limit switch and stops, giving the "limit switch hit" error. This happens even though the machine is zeroed in x and y. It also happens whenever I try run any of the sample spb files as well.
Thanks for any help!!