using a drawing table called rollup II and cnc trace software to trace

[woodman08]

VIOLIN BACK---
http://youtu.be/7Vkc4tdz2RU
http://youtu.be/cbUZg89Hqkg
I am showing the ease of setting up john walsh's cnc trace software and rollup II ,to
trace out a violin back using any computer
In the end i will have a *.dxf file ready for software to create a toolpath to cut the
violin back out of maple
If you have questions conact me or john.walsh@logicgroup.com logic group
His software is easy to install ,in minutes you're up and tracing
GUITAR BLANK
http://youtu.be/5n2PYqv2Ges
http://www.youtube.com/watch?v=s7uuFaQdzAU
using the rollup II and john walsh's cnc draw program i have traced a guitar blank to
produce a *,dxf file ready for cad
If you have questions conatct me or
john.walsh@logicgroup.com at the logic group in texsas
PIC GUARD ---
http://youtu.be/ZGZXAuQfEs0
sorry i called it a fret board ,had it stuck in my head
http://www.youtube.com/watch?v=ywPnV510Xq8
using the cnc trace software and a portable drawing table (rollup II) we will copy a guitar
pic guard ,creating a dxf file and eventually creating a tool path and putting it on the cnc
machine and cutting it out
Any questions conatct me or john.walsh@logicgroup.com at the logic group in Texsas

[frank134]

That not bad but $800.00 for just a trace software is a little to much.

[woodman08]

I don't think its that high frank

stan

[knight_toolworks]

refurb pad is about 1500.00 cool but it would need a lot of use to pay for it's self.

[Brady Watson]

Stan,
Are you aware that you can do the same thing essentially with a flatbed document scanner or digital camera and PartWorks?

-B

[woodman08]

yes i am aware ,but in my experience it needs a lot of editting ,this sample took me about 1 hour but i am happy with it

http://youtu.be/AabFmDxDDec
The full story behind my drawing table called drawing board III i bought it second hand ,then bought the software.I have always drawn my plans but in cad i am lost so now i digitize all my diagrams and i have more use out of my machine than ever .His draw program is very accurate,its origin is from the oil industry topo maps
These clock dials were lasered out and the diagrams scanned were not that great