woodman08
03-01-2013, 08:05 PM
I had some help with the cut3D file here with shopbot users .thanks
thought i would show the finished display
After running a scrap piece of cedar i got around to gluing up the black walnut and designing the display .
It took about 17hrs total between the cnc work and the rest of the tools
Its about 15 in dia and about 17 high with 3 coats of laquer
http://youtu.be/1JYjtMGqlEg (http://youtu.be/1JYjtMGqlEg)
thought i would show the finished display
After running a scrap piece of cedar i got around to gluing up the black walnut and designing the display .
It took about 17hrs total between the cnc work and the rest of the tools
Its about 15 in dia and about 17 high with 3 coats of laquer
http://youtu.be/1JYjtMGqlEg (http://youtu.be/1JYjtMGqlEg)