wooden_innovations
03-17-2006, 05:19 PM
I am trying to start my Shopbot for the first time and I keep getting this error:
STOP Button is ON, or not properly connected!
The Remote Stop Button connected to Input #4 appears to be ON and needs to be checked.
I have checked both connections on the button and in the control box. The button is not depressed when I start the software. Then I push the button and then reset it. I can hear the relays click once and the software doesn't recognize the change, even after I have pushed the system reset.
I have pushed buttons, reset buttons, removed the cable from the box, and reinstalled the cable in the box from the E-Stop, all many times.
Any suggestions would be greatly appreciated.
Rodney
Alpha 96, 3.4.19 software
STOP Button is ON, or not properly connected!
The Remote Stop Button connected to Input #4 appears to be ON and needs to be checked.
I have checked both connections on the button and in the control box. The button is not depressed when I start the software. Then I push the button and then reset it. I can hear the relays click once and the software doesn't recognize the change, even after I have pushed the system reset.
I have pushed buttons, reset buttons, removed the cable from the box, and reinstalled the cable in the box from the E-Stop, all many times.
Any suggestions would be greatly appreciated.
Rodney
Alpha 96, 3.4.19 software