A few recent items

[khaos]

Start of the gun box
http://www.boxerx.com/bot/win8066.jpg
Gun box pre clear
http://www.boxerx.com/bot/win8007.jpg
Purpleheart
http://www.boxerx.com/bot/win8046.jpg
AC hole cover before paint and fill.
http://www.boxerx.com/bot/win8102.jpg

[khaos]

Rottweiller Inlay 1/8th inch deep
http://www.boxerx.com/bot/win8212.jpg
Boxer Inlay 1/8th inch deep
http://www.boxerx.com/bot/win8200.jpg
Sepele plauqe pre finish / post sanding
http://www.boxerx.com/bot/WP_20130120_002.jpg
Shiels to cover the crossed center of swords
http://www.boxerx.com/bot/WP_20130507_003.jpg

[khaos]

Shield to cover the crossed center of swords more clear
http://www.boxerx.com/bot/WP_20130507_005.jpg
really small v-carve
http://www.boxerx.com/bot/WP_20130508_003.jpg
Marine emblem
http://www.boxerx.com/bot/WP_20130508_004.jpg
Marine emblem blushing
http://www.boxerx.com/bot/WP_20130509_001.jpg

[khaos]

African Mahogany so good looking...
http://www.boxerx.com/bot/WP_20130509_002.jpg

Customer says too light need to match mahogany stain. I say but it IS mahogany... Tinted clear with walnut... Once she is happy with the value, more clear clear for flow. (My trial for criminal mistreatment of wood has not yet been set.... )
http://www.boxerx.com/bot/WP_20130509_006.jpg

[woodshopcnc]

I do similar 3D stuff and am having an issue with the proper settings for the 3D work. Recently reloaded the software and lost my configuration. (posted a help request tonight on this forum). Can you let me know what settings you use for your carvings. Thanks Stephen