not urgent

[scottp55]

I have looked but probably not sufficiently caffeinated to find it. Please tell me what the actual desktop deck dimensions(t-slot table) are. I'm trying to figure my spacing for different jigs and clamps. Also do you have any good pictures of the desktop with the deck removed and the dimensions of the recess that it fits into in case I have to remove and replace the t-slot table. Is there a dimensioned print of the mounting points for the bolts and what size and thread are the existing bolts. Thanks a lot and have a good day. Scott

[scottp55]

Could I please get desktop t-slot tables outside dimensions. cherry-picking a load of maple for the shop to dimension for me that will also be cut to length(8/4x 12x12' planks and wheelchairs are not fun) Tanks Scott

[adrianm]

Probably best to call ShopBot or email support directly. There aren't many people on the forums with a desktop.

[gpinard]

Hi, Scott
I got a used desktop about 2 months ago, and this is question I can add to, resulting in my first post.
the aluminum deck is 26 1/2 x 19 1/2" x 1 1/2" thick. It consists of 4 slabs of aluminum extrusion, the 1st 3 are 6" wide, and the last is only 1 1/2" wide to make up the 19 1/2. attachment is a screw thru the extrusion at 3/4 from each edge, so four screws per 6" wide piece and 2 screws for the 1 1/2" piece.
The desktop I got is about 2 years old and I think it is of the current generation, so I think this info will be accurate. Gene

[scottp55]

thanks people, I had TJ measure it before class yesterday before class started. Thanks Gene, you are correct on dimensions as that is What TJ got.