2D to 3D

[wegner81]

Need some advice
I am building a advertisement display and would like to add a shop bot touch
I want to take our School mascot which is a line drawing and have it turned into 3D carving on the sign.
I may use this on many other applications .
I except to pay a fee to get this done.
I would use part works 3D to do this
thanks for any advice

[GlenP]

If you want the artwork made completely 3d James Booth is the guy to get. I am not sure if he still does 3d models now that he is part of Vectric. If you post on Vectric Forum there is some guys on there that are really good as well.
Tim Merrill is one on Vectric forum that is good at it. I have had him help me doing some banner work once that I was having trouble with. If you post your artwork perhaps some other botter would do it. I am sure there is lots of capable guys here to do it but don't advertise or post that they will take on creating artwork.

http://www.vectric.com/forum/

This is James Booth's site. http://www.carve3d.com/
Again I am not sure if he still does modelling.

Cheers,

[genek]

contact Gary at this site. support@beckwithdecor.com (http://us-mg5.mail.yahoo.com/yab-fe/mu/MainView?.src=neo&themeName=blue&bn=50_4&s=0&isFresh=1&bucketId=CMMFUSSPON09&stab=1372127287157#)
there are others here also.. vectorart3/d and two others that have slipped my mind... (getting old, i forget a lot..)

[ron_churches]

Kevin,

There's also Todd Bailey at 4m3d.com. He made an awesome 3d relief from a 2d file I scanned from a plastic bag.

Ron

[wegner81]

Thanks for the imput I will get in contactwith some of the people you listed
Thanks again for the Help!!!!!!!!

[cabnet636]

For Future reference, Mike Mezalik has become quite good at this as well

www.carveddetails.com (http://www.carveddetails.com)