jeff
07-10-2013, 10:17 PM
Hey guys.. I've had a few of you guys already helping me, and had SB guys helping, but still having fits.. Originally, I was trying to turn a profile on the indexer.. but lost comm at the same spot before starting... but could do spirals and rounding...
I learned about the MI command, and flipped my profile, and it did a great air cut.. Now... everytime I attempt to use the indexer... whether through the virtual tool, or program in vcarve then come to virtual tool, etc.. I get indexer movement, but either no y or z movement, or very very slow zy movement.. nowhere near the piece.. my speeds are set moderate to slow, but not that slow..
I have a prs standard with 4g .. and REALLY need to get this working..
I am using windows 7 with 3 gigs RAM.. nothing else is on the computer.
Any thoughts? Please!!!!:confused::confused:
I learned about the MI command, and flipped my profile, and it did a great air cut.. Now... everytime I attempt to use the indexer... whether through the virtual tool, or program in vcarve then come to virtual tool, etc.. I get indexer movement, but either no y or z movement, or very very slow zy movement.. nowhere near the piece.. my speeds are set moderate to slow, but not that slow..
I have a prs standard with 4g .. and REALLY need to get this working..
I am using windows 7 with 3 gigs RAM.. nothing else is on the computer.
Any thoughts? Please!!!!:confused::confused: