Computer died. Starting over!!!!

[rww]

Computer crashed and I'm trying to set up another one. I have a PRS Alpha 120x60 with one of Gary Campbell's ARO air drills.

I have my custom files from Gary C. backed up.
But some thing/things are not right. The link wants to do a manual tool change that I don't need. Every operation can be done with the drill and one router bit.

It also is acting like it is z zeroed from the top of the material instead of the table.

I am also getting a error message (Run-time error '28': out of stack space) When I try and send cabinets to the Shop bot through the link.
Could this happen because I am using a old computer?

I am also having issues with my Dymo printer not printing the barcode,symbols,address labels or only printing the first sheet of plywood in a batch of 16 sheets.

I have worked on this for days and am totally frustrated.
I MISS GARY CAMPBELL!!!
Please help, Thank you.

[nat_wheatley]

'I am also getting a error message (Run-time error '28': out of stack space) When I try and send cabinets to the Shop bot through the link.
Could this happen because I am using a old computer?'

I get this error too, if my control software is open when I send a file from the SB Link to the machine. If I send the file with the control software closed, it eliminates the issue.

[tri4sale]

'I am also getting a error message (Run-time error '28': out of stack space) When I try and send cabinets to the Shop bot through the link.
Could this happen because I am using a old computer?'

I get this error too, if my control software is open when I send a file from the SB Link to the machine. If I send the file with the control software closed, it eliminates the issue.

These two lines you posted "Could this happen because I am using a old computer?'" and "If I send the file with the control software closed, it eliminates the issue" leads me to think you're running an older computer with limited RAM. What are the specs on the computer you are using now?

[rww]

I don't have the full specs in front of me. 2 gig of ram I believe.

[loriny]

Ive got an older laptop for mine. I've been running the link for a few years and always have closed my SB3 control before sending the file. I just assumed this is normal and havent had an issue. Usually I C2 and C3 after sending it to the machine anyways.
Lorin