Merry Christmas to all our Botter friends

[terryjones]

Gordon Hendley and I finished the scene of Jesus' Birth today. Gordon purchased this file last month. Loaded it in Aspire 4.0. We placed an outer lip on the file as to be able to accept a picture frame with glass. The lip extended above the 3D model by 0.125 so that when the frame and glass are attached, it would not touch the model. This was cut in HDU and measures 1" x 24" x 24". Roughed with .25 endmill, Finish cut with .125 tapered ballnose. Approx. 6 hours cut time total. There was absolutely no finish sanding needed. We painted with Modern Masters Metal Effects Paint, Copper.

Hope everyone has a joyous Christmas and Happy New Year with family and friends.

Terry Jones
Gordon Hendley

[knight_toolworks]

Why did you use a roughing pass it looks like it could have all been done with the 1/8" bit. but it does nook great.

[khalid]

Merry Christmas to you Too.. Hope you will enjoy the Christmas holidays:)

[Chuck Keysor]

Wonderful plaque! Merry Christmas to one and to all! Chuck

[genek]

Nice work.
Hope that you and your family have a Merry Christmas and a Happy New Year.

[Bob Eustace]

Best wishes to all from Australia! You guys have taught us so much this past year - thank you, thank you, thank you!

[terryjones]

Thank you everyone for the wonderful comments and salutations.

[genek]

best wishes to all from australia! You guys have taught us so much this past year - thank you, thank you, thank you!
but bob has it not been all up side down, since you live down under. Marry christmas to all our friends in australia...

[sc.crab]

Very nice and Merry Christmas to you and all my shopbot friends.