joe_winslow
02-15-2010, 06:36 PM
Hello everyone - good to be back in the forum again!
I'm a former shopbotter looking for some assitance with cutting some small pieces. If there is someone out there who can help me with the type of work below, I'd greatly appreciate it.
I generally set-up several pieces cut per month for a new award or recognition product. Each piece is roughly 7-9" in diameter, 1/2" thick, and will require a .0625 to .125 ballnose.
The items being cut are for military plaques and small signs and generally can be cut from anything like corian or from a dense hardwood. These will be used as masters for casting small runs. I'll provide a shopbot ready stl for all the work so that will keep it pretty simple.
Please give me a call on my cell (469)363-0651 or email me at info@regimentalsigns.com (mailto:info@regimentalsigns.com) if you're interested.
Thanks!
Joe
Regimental Sign Co.
Washington DC
I'm a former shopbotter looking for some assitance with cutting some small pieces. If there is someone out there who can help me with the type of work below, I'd greatly appreciate it.
I generally set-up several pieces cut per month for a new award or recognition product. Each piece is roughly 7-9" in diameter, 1/2" thick, and will require a .0625 to .125 ballnose.
The items being cut are for military plaques and small signs and generally can be cut from anything like corian or from a dense hardwood. These will be used as masters for casting small runs. I'll provide a shopbot ready stl for all the work so that will keep it pretty simple.
Please give me a call on my cell (469)363-0651 or email me at info@regimentalsigns.com (mailto:info@regimentalsigns.com) if you're interested.
Thanks!
Joe
Regimental Sign Co.
Washington DC