New Cutter

[garyb]

We have just introduced a new cutter to our line.
BDP008 is a tapered 1/8" endmill based on the popular BDP002 1/8" ballnose.


3415

Spec's
3 flute RH UP
1/8" dia with a 1° total taper over 1.5" LOC
1/4" shank with 3" OAL.
www.beckwithdecor.com/index_files/Cutters.htm (http://www.beckwithdecor.com/index_files/Cutters.htm)

[garyb]

Introducing the next in line of custom cutters.
The BDP005 (2nd generation 30° v-bit)is now in full release after extensive testing.

This one was developed at the request of a number of shops who were looking for a multi-purpose V-bit that would not only cut .75" letters (material)on a single toolpath but would still cut to a OAL of 1.75" & have a ball nose for 3d work.

www.beckwithdecor.com/index_files/Cutters.htm (http://www.beckwithdecor.com/index_files/Cutters.htm)


3416

[gabepari]

Ooooh, I like the BDP005.

Gabe

[pfulghum]

Got one of those 005's... I love it.
-- pat